Documentation/Modules/Bearing Failure
Bearing Failure
Failure modes, causes, and corrective actions
Standards catalog
Validation: indicative · Method band: formula
Indicative method: Indicative closed-form or numerical model
Assumptions
- Linear elastic material behavior unless noted otherwise.
- User is responsible for load combinations and load factors per the selected design code.
- Design standard (US/EU/ISO) sets unit defaults and screening check labels — not a full code worksheet.
Limitations
- Professional screening / indicative workspace — does not replace a licensed PE or official code compliance review.
- Where specialized evaluators are not implemented, checks map solver outputs to catalog templates for orientation only.
Engineering checks
| Check | IND | US | EU | ISO |
|---|---|---|---|---|
| Failure mode guidance | implemented | — | — | — |
Detailed technical write-up for this module is not yet in the reference document. See the full reference or open the calculator for in-app guidance.
Validation & quality
Trust signals for this module — release tier, catalog status, and verification notes. Engineers should review assumptions and limitations before relying on results.
- Release tier
- Indicative
- Catalog status
- indicative
- Validation quality
- 1 / 5
- Numerical depth
- 1 / 5 · formula
- CI benchmarks
- No committed cases yet
Unclassified module. Add explicit maturity metadata.
Fleet-wide release tiers and export audit: Quality & maturity dashboard · Trust & responsibility
Indicative results still require independent engineering review for certified work.