Engineering moduleindicative

Bearing Housing

Design standard

Calculation standard

Sets screening knobs for Indicative practice — not product type or catalog geometry

ISO / catalog housing bolt and body screening. Choose foot, flange, or split mount in the form.

Target SF 2.00Service factor 1.20

Reference standards

SKF housing catalogISO 3228 context

Housing copilot

Describe bore, Fr/Fa, and speed — sizes bolt count and bolt circle for body SF. Mount style stays free unless named in the brief.

Deterministic sizing — numbers come from PhyCalcPro solvers, not a language model.

Screen housing body stress and mounting bolt loads. Calculation standard is set above — mount style stays free.

Step 1 of 5

SNL / UCP / FY / SAF screening SKU

Housing catalog SKU

Selecting a SKU fills bolt span, bolt count, mount style, and stiffness from the screening catalog (not a full OEM database).

Mounted solution kit (screening)

Mounted kit screening BOM — verify stock and seal kits with distributor. Not an e-commerce cart.

Housing SKU

Seal

Kind	SKU	Qty	Description
housing	FY 40	1	Square flange unit (FY-class screening).
seal	FY 40-labyrinth	2	Labyrinth seal set
grease	LGHP2	1	High-temp polyurea (LGHP 2 class)
accessory	FY 40-BOLT	4	Foundation bolts (4×) — size from housing check

Geometry from catalog: bolt span 102 mm · base height 36 mm · stiffness ×1.05

Catalog

Reference documentation

Standards, catalogs, and technical write-ups relevant to this module.

Candidate strategy

Typical Auto-design directions for bearing housings — compare light, balanced, and conservative sizing before committing to Validate.

Option	Basis	Pass	Tradeoff
Reference formula	Known equation	Use in report	Manual applicability
Unit conversion	SI base layer	Pass	Dimension must match
Linked module	Open calculator	Continue workflow	Requires module-specific input

Continue workflow

Typical next steps after Bearing housings